|
|
 6.2.2.2
|
11.5.2010
|
161 MB
|
New: Installation routine improved.
Fix: Better support for Windows 7, 64 Bit.
Fix: WorkNC interface improved.
|
|
|
6.2.1.5
|
24.3.2010
|
161 MB
|
New: The behaviour of the software in case of
collision events can be configured. You can either pause the calculation,
skip to the next job, or cancel the calculation completely.
New: New dongle driver, support for Windows
7.
Fix: Memory management improved to allow the
handling of huge stock models.
Fix: Machine movement at the beginning of the
nc-file for the machine simulation improved.
Fix: Max. line number in machine configuration
can now handle more than 4 digits.
Fix: Spindle speed adaptation dialog in WorkNC
interface corrected.
Fix: Adding of unnecessary blank lines fixed.
Fix: Command for changing spindle speed in
Heidenhain Conversational Language improved.
Fix: WorkNC interface improved.
|
|
|
6.2.0.13
|
19.11.2009
|
157 MB
|
Fix: Interpolation between two movements for
simultaneous 5 axis machining improved.
|
|
|
6.2.0.11
|
5.11.2009
|
157 MB
|
New: New driver for software protection
(dongle or software based protection). The drive now support Windows 7 and
Windows 2008 Server, both 32 and 64 bit.
New: New version of the DeskShare-Support
software. The support software now runs also under Windows 7 (32 and 64
bit).
Fix: Online-Help.
|
|
|
6.2.0.9
|
26.10.2009
|
140 MB
|
Attention: A new license
code is necessary to run this version. Customer having
maintenance can order
the new code.
New: New method for feedrate adaptation, based
on radial and axial engagement. Alternatively to the existing method based
on the cutting area, you can now use a method based on certain values for
the radial engagement Ae and the axial engagement Ap.
For further information, please contact
the support.
New: Material removal can now be controlled
from WorkNC interface.
New: Machine simulation can be started without
graphic feedback, like a batchjob. The result is a report containing the
collisions.
Fix: Empty cut optimization improved.
|
|
|
6.1.2.7
|
1.4.2009
|
140 MB
|
Attention: A new license
code is necessary to run this version. Customer having
maintenance can order
the new code.
New: Machine simulation improved. Simulation
of multiple files in one step is possible.
New: Material removal in machine simulation
integrated. With the newest version, you can calculate the material removal
for 3 to 5 axis toolpath. The new material removal simulation can also
handle workpieces with undercuts.
Start
Video Demo.
New: Support for different paletts in machine
simulation.
New: Language packages for Japanese,
Portuguese, Czech, Korean, English and German actualized.
New: Interface to Visi from Vero improved. It
is now possible to handle nc files with tool changes.
New: Support for software bases licensing.
Alternatively to using a dongle, you can protect the software to a certain
computer hardware.
New: NCspeed Entry Edition: Entry package for a
reduced price having restricted functions.
Fix: Help system improved.
New: Calculation time for cad comparison
improved.
|
|
|
6.1.1.7
|
15.1.2009
|
130 MB
|
New: Machine simulation completely integrated
in the WorkNC interface.
New: New version of machine simulation.
New: Feedrate adaptation is now available for
simultaneous 5 axis toolpath utilizing ball cutters.
|
|
|
6.1.0.19
|
26.8.2008
|
108 MB
|
Attention: A new license
code is necessary to run this version. Customer having
maintenance can order
the new code.
New: Holder collision check improved.
Calculation of the minimum tool length is now possible.
New: New status icons in the list of nc-files.
New: Toolpath trimming improved. New mouse
control added:
-
Ctrl+right mouse click:
Add/move point
-
Ctrl+ right mouse doble
click:
Edit point coordinates
-
Shift+right mouse click:
Delete point
New: New software protection. We now support
the new HASP HL dongle. The software is downward compatible so that it
works also with old dongle.
New: Automatic reading of holder info from
Euklid interface.
New: New program for automatic adaptation of
the postprocessor in the WorkNC interface.
New: User interface improved for avoiding
delays when accessing files form a server.
Fix: Feedrate replacement improved.
Fix: Air cut optimization improved. The holder
and shank is now taken into account.
Fix: Usage of Inches instead of Metrics in the
WorkNC interface improved.
|
|
|
6.0.1.12
|
22.1.2008
|
79 MB
|
New: Support for Windows Vista.
New: Collision check for holder and shank.
New: Spindle speed adaptation improved.
New: Display/hide parameter tabs.
New: Project wizard improved.
New: Driver for software protection (dongle).
A complete list of all new functions can
be downloaded.
|
|
|
6.0.1.0
|
30.8.2007
|
63 MB
|
Attention: A new license
code is necessary to run this version. Customer under
maintenance can order
the new code.
Fix: Switch for depth of cut in database fixed..
New: Improvement of STL raw part import. It is now
much faster and the file name is displayed as the feature name.
New: WorkNC-Interface.
- Support
for WorkNC Version 19
- Automatic
setting of holder and shank from WorkNC
- Automatic
3+2-axis machining
- Optionally,
the calculation of NCspeed can be performed completely after the
calculation in WorkNC.
- Free
selection of the raw part file (*.res)
- Avoid
unnecessary recalculation of previously calculated files
New: Memory management improved. Now you can handle
worpiece of more than 1 GB, if sufficient memory is available.
New: Info-Dialog with milling times improved (Menu
display\info machining time). The dialog is now resizable and the complete
information can be copied to the clipboard via pressing one button in the
dialog (maybe for inserting these info in Excel or Word).
Fix: Consideration of the offset when displaying the
toolpath and the workpiece in one window.
Fix: Context help (F1) improved.
Fix: Focus problem when starting NCspeed minimized
improved.
|
|
|
6.0.0.19
|
23.4.2007
|
63 MB
|
Fix: Batchserver: Adding multiple project files.
New: Selection of a distinct WorkNC raw part file
(*.res) possible.
New: Support for Korean language.
|
|
|
6.0.0.17
|
10.4.2007
|
63 MB
|
Fix: Software stabilized.
|
|
|
6.0.0.15
|
19.3.2007
|
63 MB
|
New: UG/NX interface.
New: Support for Turkish language.
New: STL/Iges view per Drag & Drop. When
displaying a graphic window for toolpath of workpiece, you can drag &
drop a STL- or Iges file to the graphic window for displaying surfaces.
New: Accuracy in 5-axis module improved.
Fix: Support for non cylindrical shanks in 5 axis
module.
Fix: Avoiding unnecessary recalculations in WorkNC
interface.
Fix: The tool overload check is not automatically
switched on.
Fix: Online visualization for cylindrical cutter
improved.
Fix: Japanese translation adapted.
|
|
|
6.0.0.11
|
29.1.2007
|
63 MB
|
New: A list of changes as well as the
installation notes can be found in a separate document.
Fix: Support for stock initialization in WorkNC
version 18.13 and higher. Support also for 3d stock.
Fix: Online visualization for cylindrical cutter
improved.
Fix: Japanese dialogs adapted.
New: New functions in 5 axis add on fiveplus.
|
|
Version
5
|
|
Type
|
Version
|
Date
|
Size
|
Changes
|
|
|
5.1.0.4
|
21.6.2006
|
73 MB
|
Fix: Problem with change between G0/G1 when using the
"rapid move border" in the machine configuration solved.
Fix: Calculation of the machining time improved.
Fix: Problem when using WorkNC raw part in combination
with concatenated postprocessor solved.
|
|
|
5.1.0.2
|
6.6.2006
|
73 MB
|
Fix: Problem with the position of the progress window
solved.
|
|
|
5.1.0.1
|
18.4.2006
|
73 MB
|
Fix: Problem writing usage of project wizard
configuration in combination with the automatic scanning of information
from file solved.
|
|
|
5.1.0.0
|
11.4.2006
|
73 MB
|
Attention: A new license
code is necessary to run this version.
|
|
New: Support for WorkNC Version 18.
New: Project handling improved. When displaying an original
nc-program, it is now easier to display also the optimized nc-program or
the work piece geometry, because the buttons are still active.
|
|
|
5.0.1.44
|
27.2.2006
|
65 MB
|
New: When using a STL raw part, the dimensions of the
base cube are automatically initialized, when no raw part base (cube,
cylinder) is choosen.
Fix: Problem writing lines with G05 solved.
Fix: OpenGL-output for toolpath display improved.
|
|
|
5.0.1.37
|
1.2.2006
|
65 MB
|
New: New algorithm for optimization of machining utilizing
indexed axis. NCspeed needs significant less memory and calculation time
for the optimization of 3+2 axis toolpaths.
Fix: Problem in cutting (splitting) and concat
toolpaths with tool change fixed.
|
|
|
5.0.1.34
|
24.1.2006
|
65 MB
|
Attention: If you are using NCspeed in combination with
WorkNC it is recommended to download and install the special repair program
(see row below).
New: Text replacement in the nc-file. Many user ask us
about a possibility to make easy text replacements in the nc-files. For
example, user wants to add a special comment line in the optimized nc-file
indicating the operator, that this file is optimized by NCspeed. This text
replacement can now be configured in the machine configuration.
|
|
|
Repair
5.0.1.34
|
24.1.2006
|
65 MB
|
Attention: If you are using NCspeed in combination with
WorkNC, there might occur collisions between tool holder and workpiece.
These problems happens only under certain circumstances if you are using
the holder collision check in WorkNC. It is recommended to download and
install this repair program if
- you have
installed a version of NCspeed from 5.0.1.15 to 5.0.1.33
- you are
using NCspeed in combination with WorkNC
- you are
calculating the holder collision check in WorkNC
If you donwload and install
this repair program, the newest version 5.0.1.34 of NCspeed is
automatically installed.
|
|
|
5.0.1.30
|
20.12.2005
|
65 MB
|
New: Detailed documentation on how to use NCspeed in
combination with Tebis and Euklid.
New: Installation
improved.
|
|
|
5.0.1.29
|
6.12.2005
|
65 MB
|
New: Improvement of the "Get Parameter from
File" machanism. Implementation of a counter for better scanning of
file names.
New: Interface to the CAD-CAM-System Euklid.
|
|
|
5.0.1.28
|
25.11.2005
|
65 MB
|
New: Improvement of the project wizard when setting
optimization parameter for several nc-files (multiple selection).
New: Better project wizard values for vibration
avoidance.
New: New functions for copy and paste complete set of
optimization parameter from one nc-file to another. Select an nc-file and
click in menu "edit", "copy". Then, select another
nc-file and click "edit", "paste" and the optimization
parameters are copied to the actual nc-file.
Fix: OpenGL display for arcs improved.
|
|
|
5.0.1.23
|
7.9.2005
|
65 MB
|
New: Support for WorkNC 17.09 and higher.
New: Usage of different project wizard configurations
for NCspeed in WorkNC toollibrary.
New: Usage of inch in combination with WorkNC.
New: Dongle driver actualized.
Fix: SUM3D interface improved.
|
|
|
5.0.1.16
|
22.8.2005
|
62 MB
|
New: Automatic tool change extended by angle A, B, C.
New: Graphical display of toolpath now support OpenGL
even for 3+2 axis toolpath.
New: Japanese resources and manual.
New: Raw part description by STL improved. Now it is
possible to rotate and move the STL file.
|
|
|
5.0.1.15
|
8.7.2005
|
62 MB
|
New: The project configuration dialog when using
NCspeed with WorkNC can be suppressed.
Fix: Status icons in the list of the nc-files
indicating the state of optimization improved.
Fix: Avoiding unnecessary recalculation of already
calculated nc-files when using NCspeed with WorkNC.
Fix: Processing of 3d stock from WorkNC improved.
|
|
|
5.0.1.12
|
8.7.2005
|
62 MB
|
New: Graphic display of the toolpath changed to
OpenGl. Now, you can dynamically rotate and zoom. The change of the size of
the graphic window is also possible. The old graphic can be activated and deactivated.
Fix: Problem with z-value of retraction movement
fixed.
|
|
|
5.0.1.10
|
15.6.2005
|
62 MB
|
Fix: Problem with import text configuration file
fixed.
|
|
|
5.0.1.9
|
3.6.2005
|
56 MB
|
New: When canceling an optimization and then using
menu item "concat project", you get a message indicating, that
the optimization is not proper finished.
New: Manual for version 5 actualized.
New: New hardlock driver setup, solving problems under
Windows XP with ServicePack 2.
Fix: Initialization of the tool reference point
improved.
Fix: Soft feedrate adaptation improved.
Fix: Enumeration of line numbers for the optimization
of concatenated toolpaths under WorkNC improved.
Fix: File name setting when optimizing
splitted/concatenated toolpaths improved.
Fix: Heidenhain conversational language BEGIN/END PGM
improved.
|
|
|
5.0.1.5
|
22.3.2005
|
56 MB
|
Fix: Flicker effects in the list of nc-files solved.
Fix: Inteface to WorkNC V17.03 improved.
|
|
Version
4
|
|
Type
|
Version
|
Date
|
Size
|
Changes
|
|
|
4.1.1.4
|
26.7.2004
|
38 MB
|
Fix: Empty cut elimination improved.
|
|
|
4.1.1.2
|
26.4.2004
|
38.3 MB
|
New: WorkNC-interface improved. Now, you can choose a
raw part file (*.sim) for the initial workpiece geometry.
New: 3+2 Achsen improved. Calculation time reduced by factor 5. The
back rotation of the workpiece will be performed only when saving of
workpiece geometry is activated.
New: Faktor for machining time is editable per machine.
Fix: APT-Format and UG native improved.
Fix: Problems with M91 in Heidenhain conversational language solved.
Fix: Automatic tool change improved.
|
|
|
4.1.1.0
|
13.2.2004
|
30.6 MB
|
New: Processing of Unigraphics-internal nc-file
format.
New: Processing of Pro/NC nc-file format.
New: Support for acrs in APT format
New: Control of dongle driver (hardlock) version for avoiding
incompatibilities.
Fix: Soft feedrate adaptation improved.
Fix: Problems with USB-Dongle solved.
Note: The hardlock driver for the
dongle is updated. It is necessary to run this complete installation.
Note: The installation of the
WorkNC-NCspeed integration is improved. Older versions of WorkNC (from
14.07) are supported. If you have already installed the WorkNC-NCspeed
installation, it is recommended to deinstall it, before runnig this
installation.
|
|
|
4.1.0.2
|
26.1.2004
|
23.8 MB
|
New: File extension per nc-file format can be changed.
New: Factor for machining time calculation added for adjustment
between theoretical and real machining time.
Fix: Tool dialog in
not german language corrected.
|
|
|
4.1.0.2
|
26.1.2004
|
7.2 MB
|
New: Japanese language adapted.
New: 3+2 Axis support improved.
|
|
|
4.1.0.1
|
8.12.2003
|
31.1 MB
|
Attention: New license code is necessary to run this version.
|
|
New: Extension for nc-file name editable.
New: Initialisation of values from previous nc-file, like parameter
settings..
New: Sidestep can be given in % of tool diameter.
New: Extra feedrate for transition form no material to material.
Fix: Problems with
arcs in G-Code.
|
|
|
4.0.1.0
|
8.10.2003
|
6.4 MB
|
New: Japanese language adapted.
New: 3+2 Axis support improved.
|
|
|
4.0.0.19
|
6.10.2003
|
6.2 MB
|
Fix: Feedrates written by parameters: some feedrates
have not been substituted by parameters.
Fix: Parameter output via formula improved.
Fix: Window with progress dialog is now always inside the visible
screen area.
Fix: Under certain circumstances, the feedrate 500 appeared in the
optimiized file.
New: WorkNC interface supports nc-file output splitted with regard
to length/time.
|
|
|
4.0.0.18
|
8.9.2003
|
5.9 MB
|
New: Soft feedrate adaptation. It is now possible to
change feedrate in smaller steps to avoid abrupt feedrate changes.
New: Support for scale factor from WorkNC.
Fix: Arcs in XZ- and YZ-plane.
|
|
|
4.0.0.17
|
25.7.2003
|
6.2 MB
|
Fix: Problems with feedrate decreasing with angle
solved.
Fix: Italian language corrected.
Fix: Output of feedrates with parameters improved.
|
|
|
4.0.0.16
|
10.7.2003
|
6.2 MB
|
Fix: Missing I, J, K-Coordinaten set to 0 (ISO-Code).
Fix: Problem with incremental Coordinates solved
Fix: STL-Import improved
New: 3+2 Axis support completely new
New: Tebis-Interface
New: Support for 1/100 mm Coordinates
|
|
|
4.0.0.15
|
16.6.2003
|
5.8 MB
|
Fix: Problem when using incremental arc center.
New: Support for Selca Format ("R" for Rapid movements)
New: Start number for feedrate parameter added
New: Language support for Italy
|
|
|
4.0.0.14
|
3.6.2003
|
5.8 MB
|
Fix: Error in Circle Interpolation (z-value) in
Heidenhain Conversational Language fixed.
|
|
|
4.0.0.13
|
8.5.2003
|
6.0 MB
|
New: Support for WorkNC V16.
New: Ignoring movements with M91 in Heidenhain conversational
language.
|
|
|
4.0.0.12
|
14.4.2003
|
6.0 MB
|
New: Support for arcs in XZ and YZ -Plane.
|
|
|
4.0.0.11
|
4.4.2003
|
12,0 MB
|
New: Language support for Spanish and Japanese
|
|
|
4.0.0.10
|
21.2.2003
|
5,9 MB
|
Fix: Writing feedrate 0 solved.
New: STL- files with ASCII- Format are supported.
|
|
|
4.0.0.8
|
17.2.2003
|
5,9 MB
|
Fix: Problem with rawpartfeatures solved. NCspeed
crashed when Z-coordinate changed.
|
|
|
4.0.0.7
|
11.2.2003
|
5,9 MB
|
Fix: Problem with the order of the coordinates (XZY
instead of XYZ) solved in Heidenhain conversational language.
|
|
|
4.0
|
1.2.2003
|
11,8 MB
|
Initial
international release
|
|
|
|
|
|
|
|
